Replace the exhaust manifold gasket
Engine 1.2
■ Remove the air filter.
■ Remove the six exhaust manifold mounting bolts. Push the manifold back and remove the gasket.
■ Insert a new gasket after cleaning the mating surfaces.
■ Screw in the collector bolts, the screws must be tightened consecutively, going in a spiral from the inside to the outside. In this way, stress formation is avoided, which may cause the manifold to rupture.
■ Install the air filter.
Motors 1.3 and 1,6 D
■ Remove the air filter
■ By loosening the three screws, remove the air intake tunnel
■ Remove the nuts securing the exhaust manifold. It is not necessary to detach the exhaust pipe from the manifold. Remove the gasket.
■ Clean the contact surfaces and insert a new gasket.
■ Screw in the fastening nuts, then tighten to the specified torque.
■ Install the air filter