Oil pump replacement

■ Loosen the V-belt and remove it.

■ Unscrew the clamps on the pressure and return lines, remove both wires. Watch out for any leaking oil.

■ Unscrew the oil pump from the bracket and rear bracket.

Install the pump in reverse order, remembering to tension the V-belt correctly. After stopping the engine, fill the system with fresh ATF oil yes. so that it initially reaches the edge of the reservoir Then start the engine several times for a short time and immediately refill the oil level to the lower mark each time. Do not run the oil pump dry. Bleed the system and check the oil level.