Changing the brake fluid
This operation basically consists in following the steps described in the previous section. Brake fluid is pumped out of the system …
Tag Archives: Opel
Replacing the brake hose – Opel Kadett
Replacing the brake hose
To prevent the brake fluid from running out of the system, Screw the cap tightly closing the filler opening onto the fluid reservoir. If you have …
Replace the brake disc – Opel Kadett
Replace the brake disc
Whenever the friction inserts are replaced, the condition and thickness of the brake discs should be checked.
■ Clock sensor attach to the screw fixing the pin of the crossover …
Brake drum replacement and repair – Opel Kadett
REAR WHEEL BRAKES – Brake drum replacement and repair
■ Loosen the rear wheel bolts. Secure the front wheels against rolling away. Release the emergency brake.
■ Raise the back …
Replace the front brake caliper – Opel Kadett
The first thing to do is to disconnect the brake hose from the caliper. To do this, unscrew the hollow bolt and close the cable outlet with an appropriately selected plug.
Type clamp …
Caliper piston cover replacement – Opel Kadett
Caliper piston cover replacement
If it is found when installing new friction inserts, the caliper piston cover is damaged, it should be mentioned as follows.…
Opel Vectra 1.7 diesel Engine and suspension
The engine is a traditional diesel engine with all the advantages and disadvantages. 1,7-liter unit develops power only 57 MILES, which does not seem to be much of a potential, as per …
Opel Vectra 1.7 diesel. Body
Opel replaced the first generation Vectra in a year 1988 well-worn, but good Ascona. According to the manufacturer's assumptions, the car is not distinguished by any particular extravagance and remains …
Bleeding the brake system – Opel Kadett
Bleeding the brake system
After each repair, which required disconnection of at least one brake hose, it is necessary to bleed the given circuit of the brake system. During a repair with a wider range …
Replace the brake fluid reservoir – Opel Kadett
Replace the brake fluid reservoir
ATE brake master cylinder
Tilt the tank to the side and pull it out of both plugs, which then remove from the master cylinder. Before installation …