The use of hydraulic cylinders in plows.
Unlocking from the position determined in this way is performed by the tractor driver by pulling the cable attached to the locking lever. In time …

Plow ratchet jack.
Lifting the plow to the transport position and lowering it to the working position It is performed mechanically by means of an automatic ratchet lift. To drive this lift …

Plowing depth adjustment with attached plows.
Plowing depth with attached plows is defined as the difference between the height of the field wheel setting in relation to the furrow and support wheel.. A necessary condition …

Trailed plows.
Even though the mounted plows are more economical and more future-proof, they did not completely displace the trailed plows. The possibilities of using larger mounted plows are limited …

Support for mounted plows.
In order to hang the plow on the tractor, it is most convenient to install the left lower link on the crank axle pins first, then right, and at the end …

Changing the position of the crank axis of the plow.
Changing the position of the crank axis of the plow also causes a partial change of the position of the plow in the transverse plane in relation to the plowing direction. Correcting …

Plowing width adjustment.
The plowing width depends on the number of plow bodies and the working width of each plow body. These values ​​are structurally determined for each type of plow. A change …

A combination of power regulation and plowing position regulation.
Mixed regulation is like a combination of force regulation and position regulation. Mixed control plowing for depth plowing …