It depends on the class of the car, its size. The more technically sophisticated the suspension, thus it provides greater driving comfort, but also …
What is a McPherson column?
What is a McPherson column – It is also the most popular suspension solution for many years, especially the front wheels, mainly used in popular class cars and …
Influence of the suspension on the active safety of the car
In every vehicle, both at rest and in motion, there is a system of forces, which must be statically and dynamically balanced. The job of the suspension is to move …
Replacing the emergency brake cable – Opel Kadett
Replacing the brake cable
■ Pull the emergency brake lever to the third notch.
■ Raise the car.
■ At the cable hook, measure the distance between the adjusting nut and the end …
Master cylinder replacement – Opel Kadett
Master cylinder replacement
The operation should begin with removing the brake fluid from the reservoir as completely as possible. Use a suction cup or syringe for this.
■ Unscrew the brake lines …
Bleeding the brake system – Opel Kadett
Bleeding the brake system
After each repair, which required disconnection of at least one brake hose, it is necessary to bleed the given circuit of the brake system. During a repair with a wider range …
Replace the brake fluid reservoir – Opel Kadett
Replace the brake fluid reservoir
ATE brake master cylinder
Tilt the tank to the side and pull it out of both plugs, which then remove from the master cylinder. Before installation …
Brake cylinder repair – Opel Kadett
Brake cylinder repair
In order to disassemble the cylinder, remove the rubber covers on both sides with a screwdriver and take out the internal elements one by one.
Wash all parts with brake fluid …
Checking and replacing the friction linings – Opel Kadett
Checking and replacing the friction linings
The thickness of the friction linings in all brake shoes is checked. The linings must be of this thickness, so that no rivet will align …
Steering gear repair – Opel Kadett
Steering gear repair – Opel Kadett
■ On both ends of the gearbox housing, remove the rubber inserts of the clamps and the seal on the end wall.
■ With each …