Repair of tubeless tires up to 6mm. Tubeless tires pump air directly into the tire and if the correct pressure is maintained, are tubeless tires that are durable and practical to use. In the event of a puncture in a tubeless tire, do not remove the nail until you reach the nearest repair site. Repair of tubeless tires does not require removing them from the wheel or even reducing the air pressure in it. From the (the repair kit is used, which must be carried in the car. This kit is made up: from an awl, ways, reamer, rubber cord, rubber mushrooms, paste tubes and vulcanizing fluid bottles. Punctures in the tire with a diameter of up to 6 mm is sealed with a rubber cord. At the time of repair it is necessary: a) attach a rubber cord to the tip of the awl, b) dip the cord into the self-vulcanizing glue, c) clean the surface of the tire at the puncture site and remove the nail from it, d) insert the awl with the rubber cord into the tire hole, e) while holding the rubber cord with your thumb, remove the awl from the tire, f) cut off the protruding piece of string with a cutter, top up the pressure and check the tightness of the tire.