Installing the toothed belt Engine 1300 Turbo – Fiat Uno

■ Attach the belt cover to the fuselage.

■ Install the pinion on the camshaft, tighten the bolt to the torque 83 Nm.

■ Retract the tensioner roller and lock it.

■ Align the pinion with the mark on the cover plate. Force must not be used when doing this, because the valves may be close to the pistons. If necessary, reverse the direction of rotation or turn the crankshaft slightly and the camshaft is in the correct position, set to the ZZ point (Lynx. 3.8).

■ Refit the toothed belt, paying attention, that the drive cable is tight.

■ Loosen the tensioner nut and rotate the crankshaft two turns • clockwise.

■ Position the camshaft sprocket again and check it, the mark on the crankshaft wheel is correctly positioned.

■ Tighten the tensioner roller (44 Nm).

■ Measuring instrument 1895751000 set the required toothed belt tension (Lynx. 3.9). The desired value is 2,5 medical history (2.5 and).