Replacing the ball joint of the steering rod
■ Remove the clasp and unscrew the castle nut
■ Use a suitable puller to disengage the pivot pin …
Replacing the ball joint of the steering rod
■ Remove the clasp and unscrew the castle nut
■ Use a suitable puller to disengage the pivot pin …
Vibration damper replacement
To replace the steering gear vibration damper, it must first be unscrewed from the bracket, and then from the clamp.
The top clamp bolt should be used for this …
The main danger when driving in winter conditions is the possibility of skidding on snow or water (or both at the same time). The danger increases with increasing width …
Engine 1.3 16In Multijet. Its variety is particularly interesting 90 KM and 200 Nm. It is already 70 KM per liter of capacity! It was achieved …
Bleeding the brake system
After each repair, which required disconnection of at least one brake hose, it is necessary to bleed the given circuit of the brake system. During a repair with a wider range …
The steering system consists of a steering mechanism with rack and pinion gears and length-adjustable steering rods. The steering gear cannot be adjusted, which is fastened …
Symptoms
Jerks, loud burning (rattling) and insufficient engine power.
Cause – injection actuator valve
The injection actuator solenoid valve is worn or damaged. He is, Similarly …
Symptoms
Jerks and fading out of ignition in the lower speed range, black smoke when accelerating.
Cause – exhaust gas recirculation
Exhaust gas recirculation valve (EGR valve) is covered …
Symptoms
Misfire and engine stalling while driving. It is not possible to restart the engine or it takes some time to start. Occasionally …