Plowing depth adjustment.
There are four basic systems for adjusting the plowing depth with mounted plows: copying regulation, force regulation, position regulation and …
Category Archives: Agricultural mechanics
Leveling the plow in the transverse direction
Leveling the plow in the transverse direction.
Leveling the plow in the transverse direction is achieved by changing the length of the right or additionally - the left one …
Mounted plows
Mounted plows.
Mounted plows can be one- and multi-blade. Each mounted plow is connected to the tractor at three suspension points. To make such a connection …
Chains stiffening the lower rods of the suspension system
Chains stiffening the lower rods of the suspension system.
The possibility of a slight rotation of the tool in the horizontal plane is necessary to facilitate the control of the tractor. Had this possibility not …
The plow suspension system on the tractor
The suspension system on the tractor.
Mounted plows are connected to the tractor by means of a 3-point linkage, which is part of the tractor's hydraulic lift. The suspension system is folded …
Trailed and mounted tractor plows
Trailed and mounted tractor plows.
Depending on the method of connecting the plow with the tractor, we distinguish between trailed plows and plows mounted on a tractor. Due to numerous …
A dredger for deep soil loosening
A dredger for deep soil loosening.
When growing deep-rooting plants, like for example. root crops, deep loosening of the soil is necessary. Due to this, that deep …
Distance of the skimmer from the actual body
Distance of the skimmer from the actual body.
Top layer of soil, weedy and grassy, rich in organic substances, it loses its lumpy structure due to weather conditions and …
Additional plow working units
Additional plow working units.
In order to obtain better quality of plowing, the plows are equipped with additional working units, which include knife or disc coulters, …
Half-screw and screw mouldboards
Half-screw and screw mouldboards.
- semi-screw, which differ from the previous ones in the length of the wing and the even greater bend of the upper part of the wing to the front and the bend of the lower wing …