Additional plow working units.
In order to obtain better quality of plowing, the plows are equipped with additional working units, which it includes …

Half-screw and screw mouldboards.
- semi-screw, which differ from the previous ones in the length of the wing and even greater curvature of the upper part of the wing …

Plow working units – Mouldboards.
The mouldboard is fitted directly above the blade. Together with the blade, it forms a common smooth surface, on which the cut furrow slides. …

Setting the ploughshare in relation to the furrow wall and the bottom of the furrow.
The position of the ploughshare in relation to the furrow wall and the bottom of the furrow is determined by the angles α and β …

Blade: European and American.
There are two types of shares: European and American.
It stands out in every ploughshare: edge, beak and back. Relative to the direction …

Plow working units – Plow body.

The plow body is its main working unit. It is made up of parts, which directly affect the furrow slice, how: blade …

Agrotechnical requirements - plowing.

Plowing is the basic tillage operation. It aims to create optimal conditions for the accumulation of water and nutrients in the soil. From the …

Characteristics of harrow teeth.
The teeth of the harrows are rigidly connected to the truss of the supporting frame and act as wedges with a vertical working edge. Teeth can have different sections. …

Disc plows.
Disc plows are used primarily in the cultivation of heavily sodden news, fallow and clearings and on stony soils. Share bodies do not give in …

Plows with swiveling bodies for plowing stony soils.
Special plows with swiveling bodies are used for plowing stony soils. The plows are connected in these plows …