The actual braking time is the time from the moment the brakes are applied until the vehicle is stopped; takes place during this period …
Author Archives: Time
Braking distance
Braking distance. The braking distance is the distance traveled by the vehicle from the moment the driver notices the obstacle until the moment the vehicle stops. Time, …
The role of the brakes
The role of the brakes. The job of the brakes, used in any motor vehicle, is to reduce the driving speed, stopping the vehicle and immobilizing it when stationary. Every motor vehicle should be …
Adjusting the camber angles of the front wheels using the HPA device
Adjusting the camber angles of the front wheels using the HPA device. We control and, if necessary, equalize the pressure in the tires to the value 1,6 kG/cm2, - We raise the front …
Camber angles of the front wheels
Camber angles of the front wheels. The camber angles of the front wheels should be equal in each car. The permissible angular difference between both wheels on the car should not be …
Car maintenance and inspection
Car maintenance and inspection. Before commencing maintenance and inspection, the vehicle should be washed and cleaned. This is necessary to protect the lubrication points from being introduced into …
Health and safety rules when operating a vehicle
Health and safety rules when operating a vehicle. All service, maintenance and repair work, where the employee must be under the car, should take place at stands equipped with …
The principle of checking the camber angle of the front wheel
The principle of checking the camber angle of the front wheel. The check is made on a level surface with the front wheels in straight position. Appropriate sizes must be set …
Adjusting the steering rod
Adjusting the steering rod. The measurement is made with an instrument placed with its tips against the edge of the rim (at the height of the axis of rotation of the wheels) front first, and then from …
Setting the toe-in using two slats
Setting the toe-in using two slats. You can measure the toe-in or toe-in of the front wheels yourself, using e.g.. two slats. After adjusting the front wheels …