Emergency brake adjustment
Before adjusting the emergency brake, make sure, with service brakes, especially the rear wheels, are operational.
■ …
Emergency brake adjustment
Before adjusting the emergency brake, make sure, with service brakes, especially the rear wheels, are operational.
■ …
Checking the assistive device
Press the brake pedal several times, when the engine is not running, to remove residual vacuum from the servo.
Keep the brake pedal depressed and start the engine.
Noticeable …
Replacing the booster
■ Remove the master cylinder
■ Unscrew the cap nut securing the vacuum hose.
■ Remove the windscreen washer reservoir.
■ Unscrew the light switch from the pedal support …
Replacing the braking force corrector
Each of the diagonally divided circuits of the braking system is equipped with a brake force regulator. Correctors are placed next to the master cylinder.
You should always …
The first thing to do is to disconnect the brake hose from the caliper. To do this, unscrew the hollow bolt and close the cable outlet with an appropriately selected plug.
Type clamp …
Caliper piston cover replacement
If it is found when installing new friction inserts, the caliper piston cover is damaged, it should be mentioned as follows.…