Replacing the valves of the lubrication system (engine 1,2)
Oil pump reduction valve replacement method.
The method of replacing the bypass valve is described below, which is …
Replacing the valves of the lubrication system (engine 1,2)
Oil pump reduction valve replacement method.
The method of replacing the bypass valve is described below, which is …
Oil pump replacement and inspection (engines 1,3 and 1,6 D)
■ Remove the oil pan
■ Unscrew the toothed belt cover and remove the belt.
■ Remove from …
Oil pump replacement and inspection (engine 1,2)
■ Remove the oil pan
■ Remove the bolts securing the oil pump, using a polygon L-key.
■ Undo the fastening screws …
Change the oil filter
The oil filter must be replaced regularly, in accordance with the manufacturer's recommendations. It is possible to check, whether the oil filter is clogged as follows: when hot …
Replace the oil pan gasket (engines 1,3 and 1,6 D)
■ Drain the engine oil.
■ Screw the oil drain plug back in with a new seal (moment …
The engine is lubricated under pressure, produced by a gear pump, which one in the engine 1.2 it is housed in the crankcase and driven by the camshaft, a …
Camshaft replacement
■ Remove the engine head
■ Place the camshaft housing on two wooden blocks and remove the cover.
■ Remove the gear wheel fixing bolt …
Checking and adjusting the timing setting
■ Remove the air filter.
■ Remove the air filter.
■ Remove the camshaft housing cover.
■ Remove the clutch housing cover.
■ …
Replacing the toothed belt
■ Disconnect the battery from the vehicle's electrical system.
■ Remove the air filter.
■ Remove the cover from the clutch housing.
■ Remove the V-belt.
■ …
DISTRIBUTION (ENGINE 1,6 D)
Checking and adjusting the toothed belt tension
■ Loosen the alternator mounting and remove the V-belt.
■ Remove the upper and lower belt covers …