Horse plows – Untreated plows.

The untrained plows are of the simplest construction. The body of such a plow is connected …

Semi-mounted plows.
These plows are an intermediate design solution between trailed and mounted plows. They are built as five plows- and more furrows. Compared with …

Correcting the plow beam position.
In the plows, which are smaller than the track width of the tractor, the drawbar may not be attached to the tractor's symmetry axis. …

Attach the plow.
The plow hitch is located in its front part. It is used to connect the plow to the tractor. The hitch includes a crossbeam attached to the …

Two-axle spreader.
A two-axle spreader works in the same way as the described single-axle spreader. Instead of a webbing-rubber belt conveyor, a floor slat-chain conveyor is used. They …

Fertilizer spreading unit.
The fertilizer spreading unit consists of a two-section charging hopper and two spreading discs. The drive to the conveyor is transmitted from the power take-off shaft …

Trailed spreaders.
Trailed tractor spreaders are commonly used for sowing fertilizer lime. The load boxes of these spreaders are built on the trailer chassis one- or biaxial. On …

Principles of operating a mounted spreader.
Two hand levers are used to turn the movable adjustment discs, which in a fixed position can be locked with a special pin. When setting the spreader to …

Mounted spreaders.
Spreaders are used for sowing lime, as well as for sowing other mineral fertilizers on these farms, which use high-dose fertilization.
Produces …

Principles of operation of fertilizer seeders.
Before starting work, each fertilizer drill should be set to the desired sowing quantity per hectare. Sowing adjustment units are set according to …